-THIS SERVICE IS FOR TWIN MONO BLOCK NIKASIL (Nickel Silicon Carbide)
BOTH 2 AND 4 STROKE CYLINDERS THIS IS SERVICE WHERE WE TORQUE THE CYLINDER IN OUR CUSTOM MADE PLATES TO MIMIC THE CYLINDER BEING FASTENED TO THE CASE. THIS WILL GET YOU THE STRAIGHTEST BORE ON THE MARKET, BECAUSE THE CYLINDER WILL ACTUALLY BE SLGHTLY TWISTED WHEN NOT TORQUED TO THE CASE. 
-The HG7 cylinder finish is a process that we have perfected over many years here at Indy Specialty. Using multi step process to precision hone the cylinder to allow a better finish than any OEM for extended the ring and piston life. The standard honing practice used by most re-plating companies is out dated ….Nikasil (silicon carbide) cylinders are much to hard for the aggressive finish used on old cast iron cylinders….  leaving the cylinder rough like the standard finish will lead to premature failure and ring and piston skirt breakdown. With our multi step process and torque plates we use in the CNC hone we can produce a much smother finish, and a much straighter bore being precise down to the ( tenth ) …..0001”. This will allow extended ring and piston life as well as less heat buildup.
 
-This service is For the customer that may have a used cylinder that you may wish to use, or bought a cylinder that is either replated or used and wants a persison hone for the new ring and piston install.
-  This service requires you to send in your cylinder. upon arrivel your cylinder will be cleaned in our state of the are wet media blaster and will come out looking new. Then it is inspected and measured to be sure of sizing and no damage to the plating. IF a cylinder is out of spec or needing replate we will email the customer with options on repairs.